Figure 41: Network Connections - Windows Vista; Figure 42: Local Area Connection Properties - Windows Vista - Hughes HN9000 User Manual

Chapter 6
Note: If a red X appears next to the Local Area Connection icon, check your connections. You cannot
successfully configure your system if the red X is present.
2. Right-click the icon that represents the satellite modem network connection, and select Properties.
The Local Area Connection-NIC Card Properties dialog appears as shown in Figure 42: Local Area Connection
Properties – Windows Vista on page 48.
Note: Depending on your security settings, a pop-up User Account Control message may appear, requesting
that you confirm the action before proceeding. If you see this message, click Continue to proceed.
3. Ensure that both Client for Microsoft Networks and Internet Protocol (TCP/IP) are installed and checked as shown.
4. If NetBEUI is installed and checked, uncheck it or uninstall it.
5. Highlight the appropriate TCP/IP connection. Be careful not to uncheck the checkbox.
6. Click Properties.
48
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. A
Figure 41: Network connections – Windows Vista
Figure 42: Local Area Connection Properties – Windows Vista
Computer settings