Replacing The Waste Toner Tank - Kyocera Mita mita KM-P4850w Operation Manual

3. Replacing the Waste Toner Tank

When the waste toner tank becomes full the message "Check waste
toner tank" is displayed. Since the Attention indicator on the operation
panel will be lit and printing will be disabled, replace the waste toner
tank with a new tank.
Inch specifications
Check waste
toner tank.
Metric specifications
Check waste
toner tank.
1 Open the right cover and remove the waste toner tank by
pulling it out toward you.
2 Seal the waste toner tank opening with the seal located on it.
CAUTION
DO NOT attempt to incinerate the toner containers or
the waste toner tank. Dangerous sparks may cause
burns.
CAUTION
DO NOT attempt to force open or destroy the toner
containers or the waste toner tank.
CHAPTER 6 TROUBLESHOOTING
3 Insert a new waste toner tank into the machine.
4 Close the right cover.
*Toner in the waste toner tank cannot be reused.
G After use, ALWAYS dispose of the toner containers
and the waste toner tank in accordance with
Federal, State and Local rules and regulations.
6-5