Table of Contents
Advertisement
1.4. Setting Up and Interfacing
1—Open the Top Cover
1. Remove the packing tape from the printer.
2. Open the printer top cover all the way.
2—Install the Toner Container
1. Take the toner container from the toner kit.
2. With the label side down, thoroughly shake
the toner container (in the direction of the ar-
row) ten times or more to loosen and mix the
toner inside.
3. The bottom of the toner container is sealed
with a sealing strip. Peel off the seal on the
toner container and carefully pull off and dis-
pose of the sealing strip.
Be sure to peel the seal off the toner
container before the toner container
is fitted into the developer unit.
4. Install the toner container on the developer
as show in the diagram.
1-8
Developer Unit
Top Cover
Toner Container
Sealing strip
Advertisement
Table of Contents
