Table of Contents
Advertisement
The TV Setup menu is displayed on your TV screen.
The SELECT button on the remote control opens the Gateway menu only on the TV/Source that the re-
Note:
mote control is programmed to operate. If you press SELECT and nothing happens, you need to determine
which TV the remote operates.
V
TV (RF) S
ERIFYING THE
Press MENU button on the RG2400 front panel. The Gateway Menu is displayed.
1.
Use the down or up key on the RG2400 or the remote control to scroll to TV Setup.
2.
3. Press SELECT. The TV Setup Menu will be displayed on your TV.
Use the down or up key on the remote control to highlight the TV you want to examine.
4.
5. Press SELECT.
For example, if you selected TV1, the Setup 1 menu will be displayed. The selected RF setting is displayed,
in this case channel 6 has been selected.
Your Network Service Provider sets up the initial RF channel settings and your TV to provide program
Note:
channels by programming the output to a specific RF channel. If you need to change the RF channel settings, it
is recommended that you call your NSP to do this for you.
Press the EXIT button twice to exit back to the program screen.
6.
28
TV Setup Menu
TV1
TV2
TV3
Position Graphics Display
Exit
Use
and
Use EXIT to return to program viewing
See "Determining the Remote Control ID" on page 24.
ETTING
Setup 1
TV (RF) Channel
Secondary Audio
Display Language
Emergency Alert Device Support
TV
Use
and
Use
and
Use EXIT to return to previous menu
SEP 3 3:22 PM
, then press SELECT
SEP 3 3:22 PM
6
Spanish
English
OFF
4:3
to select item
to change value
Advertisement
Table of Contents
