4. Setting up the PCs
This section describes the steps to set up your PCs to connect to the Motorola Cellular Gateway NC800. The
setup procedure should be the same for both LAN and WLAN connections. Refer to your Wireless adapter's
installation manual for detailed information about Wireless connections.
Configuring Windows 98 and Millennium (ME) PCs
1. Click on the
Panel.
2. Double click on the
3. In the Network dialog box, select TCP/IP for the applicable
Ethernet adapter. Click on the Properties button.
4. Select the IP Address tab. Select Obtain IP address
automatically.
Motorola Cellular Gateway NC800 User Guide Version 2.0
button. Select Settings->Control
icon.
Page 21 of 110