Table of Contents
Advertisement
R
Y
ECORDING
OUR
When you are connecting your RG2400 to a VCR that has more than one AV input, be sure to plug into
User Tip:
the default, or primary input, which could be called AV-1 or L-1.
Make sure that your NSP has connected the VCR to the RG2400. For examples of VCR connections See "TV/
VCR/Audio Connections" on page 34.
Turn on your VCR.
1.
Load the tape you want to record on.
2.
Press GUIDE on your remote control.
3.
Highlight the channel you wish to record.
4.
Press SELECT.
5.
Start the record function on your VCR. (Consult your VCR user's manual for the correct procedure.)
6.
If you don't want caller ID or other messages to appear in a program you are recording, turn the caller
User Tip:
ID feature off. See User Tip on
S
U
Y
RG2400 T
ETTING
P
OUR
The IR Blaster (see illustrations on
Note:
the RG2400 by your NSP before the RG2400 can be programmed to record your favorite program. If the IR
Blaster hasn't been installed, contact your NSP. Not all NSPs support use of the IR Blaster.
To setup the RG2400:
Press GUIDE on your remote control.
1.
Use the up or down key to highlight the program you wish to record.
2.
Press SELECT. An options menu is displayed.
3.
Follow the interactive program guide instructions to set up the times to you want start and stop the recording.
4.
The record set up can be accessed from the Pay-Per-View menu so your pay-per-view selection can
User Tip:
be recorded at the time you choose.
When your programming is complete, the following occurs.
•
Your VCR begins recording.
•
The record LED on the front panel of RG2400 turns on.
You cannot change channels while the recording is in progress.
Note:
C
Y
ANCELLING
OUR
If you want to cancel a recording in progress:
Press SELECT on your remote control.
1.
Use the right key to highlight "Cancel."
2.
Press SELECT. Your recording will be canceled.
3.
F
P
AVORITE
ROGRAMS
page
18.
S
Y
O
TART
OUR
page
R
ECORDING
VCR (O
)
PTIONAL
38) must be installed and your VCR(s) must be programmed into
19
Advertisement
Table of Contents
