Table of Contents
Advertisement
V
TV C
ERIFYING THE
To playback the TV code:
1. Press the LED key and hold it down until the LED
flashes rapidly.
2. Press the INFO key. The LED stops blinking at this
point and stays on solid.
3. Press and release the C key. The remote is now in play-
back mode.
4. Observe the LED. The TV code will be indicated by a
blink sequence for each number. See example below.
For example, code 130 would show as the following:
<pause> <long blink> <off> (represents 1)
<pause> <long blink> <long blink> <long blink><off> (represents 3)
<pause> <short burst of flickering blinks> <off> (represents 0)
V
S
ERIFYING AND
ETTING
The TV Setup menu allows you read the TV RF settings, as well as set Secondary Audio, Display Language
and the EADS display. These settings are accessed in the TV Setup Menu.
A
TV S
CCESSING THE
To access TV Setup Menu:
Press the MENU button on the front panel of the RG2400.
1.
The Gateway Menu is displayed on your TV screen.
Use the down or up key on the RG2400 or the remote to highlight TV Setup.
2.
Press the SELECT button on the RG2400 or the remote control.
3.
ODES
SRC-300A
O
F
THER
EATURES
M
ETUP
ENU
Gateway Menu
TV Setup
Remote Control Setup
Exit
1. Press the MUTE button and hold it down until the LED
at the top of the remote control flashes rapidly.
2. Press the FAV button. The remote is now in playback
mode.
3. Observe the LED. The TV code will be indicated by a
blink sequence for each number. See example below.
SEP 3 3:22 PM
Use
and
, then press SELECT
Use EXIT to return to program viewing
SRC-200
27
Advertisement
Table of Contents
