Table of Contents
Advertisement
C
ONFIGURATION
Your Network Service Provider installs the RG2400 and connects all your electronic devices to the RG2400.
However, you may need the information in this section if you ever want to do any of the following:
•
Move existing devices to a different location
•
Add new devices to your system
•
Reconfigure existing connections
The RG2400 should be located in the area with your primary TV (TV1) and your home entertainment sys-
Note:
tem.
When you rearrange your equipment, be sure to unplug and plug in your equipment in the following order:
Unplug all electronic devices, including the TV, VCR, and RG2400.
1.
Disconnect all cables between your electronic devices.
2.
Make your planned changes.
3.
Reconnect the cables between these devices.
4.
When you are plugging your RG2400 in to a VCR that has more than one AV input, be sure to plug
User Tip:
your RG2400 into the default, or primary input, which could be called AV-1 or L-1. Consult your VCR user's
manual.
After you have connected the cables, first plug in the RG2400.
5.
RG2400 back panel.
ETHERNET
NETWORK IN
1
2
ETHERNET
1.
NETWORK IN
2.
NETWORK IN/TV OUT
3.
TV OUT
4.
S-VIDEO
5.
AUDIO L and AUDIO R
6.
VIDEO (composite)
7.
DIGITAL AUDIO (Dolby Digital or AC-3 on S/PDIF connector)
8.
IR BLASTER
9.
AC Power
10.
AC Outlet
11.
E
XAMPLES
NETWORK IN
TV OUT
TV OUT
S-VIDEO
5
3
4
R
L
IR BLASTER
AUDIO AUDIO VIDEO
AC-3
9
6
8
7
AUX POWER
120 V -
50-60 Hz
120 V -
3.0A MAX
50-60 Hz
3.3A MAX
10
11
33
Advertisement
Table of Contents
