Verifying The Ip Address In Windows 2000 Or Windows Xp; Ipconfig Window 1 For Windows 2000 And Xp; Ipconfig Window 2 For Windows 2000 And Xp - Motorola surfboard sbg901 User Manual

Wireless cable modem gateway
Hide thumbs Also See for surfboard sbg901:
Table of Contents

Advertisement

11. Click OK to close the Local Area Connection Properties window.
12. Exit the Network Connections window.
13. Exit the Network and Sharing Center window and the Control Panel.
When you complete the TCP/IP configuration, go to

Verifying the IP Address in Windows 2000 or Windows XP

To check the IP address:
1. On the Windows Desktop, click Start.
2. Select Run. The Run window is displayed.
3. Type cmd and click OK
4. Type ipconfig and press ENTER to display your IP configuration. A display, like below,
indicates a normal configuration:
If an Autoconfiguration IP Address is displayed as in the window below, there is an incorrect
connection between your PC and the digital voice modem or there are cable network problems.
Check the following:
Your cable connections
Whether you can see cable-TV channels on your television
After successfully verifying your cable connections and proper cable-TV operation, you can renew
your IP address.
2 Getting Started
This document is uncontrolled pending incorporation in PDM
Figure 20 IPCONFIG window 1 for Windows 2000 and XP
Figure 21 IPCONFIG window 2 for Windows 2000 and XP
Verifying the IP Address in Windows
34
Vista.

Advertisement

Table of Contents
loading

Table of Contents