Motorola RG2400 User Manual page 12

Button Name
Power
Menu Displays the Gateway Menu.
Info Displays information about the currently selected channel.
Guide Displays the program guide.
Channel Up Increases the channel number.
Channel Down Decreases the channel number.
Messages
LED
The following table describes the LEDs on the front of the RG2400. These LEDs operate at the primary viewing
location, which is TV1
RG2400 LED
Messages LED A lit LED indicates one or more voice mail messages are present.
When the LED is off, there are no voice messages present.
Power (On) LED Lit when the AC outlet is switched on.
Blinks off and on during the startup process.
Remote LED Briefly lit when a remote control key is pressed (using the remote tuned to the first stream or primary TV). Indicates
that remote keystroke activity is being seen by the settop.
Clock Display Under normal operation, this display shows the current time.
(4-character
When the user changes channels, this display will display the channel selected for a few seconds, and then
display)
return to presenting the current time.
Hardware Signoff - If the xDSL connection is lost or broken, the two characters on the left display a circling pat-
tern, the two on the right will not be lit.
Software Signoff - If the xDSL connection is established but the system is unable to establish software signon,
the two characters on the left display a circling pattern and the two characters on the right also display a similar
circling pattern.
12
Exits any active application.
Initiates power off sequence (either shows message/time display or power off channel depending on local
settings).
Toggles Power LED and the AC outlet (turns both LED and AC outlet on and off).
Reboots (restarts) the RG2400 if pressed and held for 5 seconds or more.
On LED
Clock
Display
Button function
Remote
LED
LED Function