Introduction
Audience
How to Use This
Guide
A
T
BOUT
This guide describes how to install and configure a 3Com® ONline
ONcore® Edge Router module into the 3Com ONline System Concentrator
or ONcore Switching Hub. In addition, this guide provides troubleshooting
suggestions in case a problem arises with the module.
If the information in the release notes shipped with your product differs from
the information in this guide, follow the release note instructions.
This guide is intended for the following people at your site:
Network manager or administrator
Trained hardware installer or service personnel
Table 1 shows the location of specific information.
Table 1 How to Use This Guide
If you are looking for:
General information about the Edge Router module
Description of the module architecture
Typical applications of the Edge Router module
Features of the Edge Router module
An overview of the installation and configuration process
Procedures for unpacking the Edge Router module
Procedures for preparing to install the Edge Router module
Procedures for installing the Edge Router module
An overview of the managed configuration process
Procedures for attaching a management terminal
Procedures for configuring Edge Router carrier parameters
G
HIS
UIDE
™
or
Turn to:
Chapter 1
Chapter 2
Chapter 3
Need help?
Do you have a question about the 2103R-CSDI and is the answer not in the manual?
Questions and answers