Attaching A Management Terminal - 3Com 2103R-CSDI Installation Manual

Using ONdemand
NCS
Carrier
Configuration Tasks
Attaching a
Management
Terminal
The 3Com ONdemand
manager with a graphical user interface. For instructions on using
ONdemand NCS to manage the carrier, refer to one of the following
documents:
Transcend Enterprise Manager ONdemand Management for Multi-Function
Hubs, Version 4.0 for UNIX (Document Number 17-00320)
ONdemand Network Control System for Windows User' s Guide (Document
Number 17-00472)
To configure an ONline or ONcore Edge Router carrier in a managed hub:
1 Attach a management terminal to the console port of the network
management module (TRMM, DMM, or EMM).
2 Use the management terminal to configure the carrier using 3Com network
management commands.
Use a terminal (or workstation running a terminal emulation program) to
configure the Edge Router carrier.
Attach a terminal to a port on the network management module to
configure or modify hub parameters, including:
Selecting networks for modules in the hub
Changing configurations
Reporting the condition of any module in the hub
For information on attaching and configuring a management terminal for
your hub type, refer to the documents specified in Using Management
Commands on page 3-2.

Attaching a Management Terminal

™
Network Control System (NCS) is an SNMP
3-3