Handset, Headset, And Speaker; Headset, Handset, And Speaker Overview; Handset - Cisco 7931G User Manual

Handset, Headset, and Speaker

•
•
•
•
•

Headset, Handset, and Speaker Overview

You can use your phone with these audio devices: a handset, headset, or speakerphone. The phone is off-hook
when the handset is lifted or another audio device is in use. The phone is on-hook when the handset is in its
cradle and other audio devices are not in use.

Handset

The following table describes how to use the handset.
If you want to...
Use the handset
Switch to the speakerphone or a
headset during a call
Adjust the volume level for a call
Headset, Handset, and Speaker Overview, page 55
Handset, page 55
Headset, page 56
Speakerphone, page 56
AutoAnswer with Headset or Speakerphone, page 57
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
C H A P T E R
Then...
Lift it to go off-hook; replace it to go on-hook.
The ringing line is automatically selected. Contact your system
administrator about options to always select the primary line.
Press or ( ), then hang up the handset.
Press the Volume button during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.
4
55