Table of Contents
Advertisement
Installing Your Phone
(Optional) Attaching the Desk Stand
(Optional) Attaching the Desk Stand
STEP 1
STEP 2
STEP 3
Cisco Small Business Pro SPA IP Phone 525G (SIP) User Guide
Number
Component
1
Auxiliary port. Only for use with the SPA932 attendant console.
2
Power port. Insert the power adapter plug into this port.
3
Additional Ethernet port. Connect an Ethernet cable to this port to provide
network connectivity to a PC. (This port cannot be used when the phone
is connected to the network via the built-in Wireless-G client.)
4
Switch (Ethernet) port. Connect the network cable to this port.
5
Phone cord slot. Insert one end of the phone cord into this slot and the
other into the jack at the bottom of the phone handset.
6
USB port. For use with an external USB memory device (optional).
Line up the tabs on the desk stand with the slots on the back of the phone.
Slide the bottom tabs into the slots
Lightly press down on the top of the desk stand. It should easily slide into the top
slots. Do not force.
NOTE: Do not attach the desk stand if you
want to mount the phone to the wall. If you are
attaching a SPA932 attendant console attach
the console before attaching the desk stand.
2
27
Advertisement
Table of Contents
