Installing The Desk Stand Or Wall Mount (Optional) - Cisco SPA50X User Manual

Installing Your Phone
Phone Connections
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
Connect the 2.5mm connector from the headset into the headset port on the
right side of the IP phone as shown:

Installing the Desk Stand or Wall Mount (Optional)

The phone can be set on a flat surface, such as a desk, or mounted to a wall. This
section describes the installation of the desk stand. If you are attaching a
Cisco SPA500S attendant console, attach the console before attaching the desk
stand.
To mount the phone to the wall, you must use the MB100 wall mount bracket kit
(available separately). Do not attach the desk stand if you intend to mount the
phone to the wall. To mount the phone on the wall, follow the instructions included
with the wall mount.
2
17