Connecting Your Phone's Power - Cisco Small Business Pro User Manual

Installing Your Phone

Connecting Your Phone's Power

STEP 5

Connecting Your Phone's Power

Cisco Small Business Pro SPA IP Phone 525G (SIP) User Guide
Hang onto screws mounted in the wall.
If you are using an external power source, plug it into the building's power source,
and plug the power supply into the phone base. See
If you are using Power over Ethernet (PoE) to power the phone, the phone will
receive power when you connect an Ethernet cable from the phone's WAN port to
a switch in your network that provides PoE. See the
Wired Network" section on page
NOTE: The SPA525G does not ship with a
power supply. If you are not using Power over
Ethernet (PoE), you must order the PA-100
power supply separately from Cisco.
31.
Figure 1 on page 26, item #2.
"Connecting Your Phone to the
2
30