Connecting A Pc To Your Phone; Connecting Wired And Wireless Headsets - Cisco SPA50X User Manual

Installing Your Phone

Connecting a PC to Your Phone

Connecting a PC to Your Phone
STEP 1
STEP 2

Connecting Wired and Wireless Headsets

Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
A PC can be connected to the network through the phone. Cisco does not
recommend connecting a PC to the phone if the phone is connected to the
network wirelessly.
To connect a PC to your phone:
To provide network access to a PC, connect one end of a Cat5e or higher Ethernet
cable (not provided) to the PC port on the back of the phone body. See
Connect the other end of the Ethernet cable to the RJ-45 port on your PC.
The IP phones support headsets from different manufacturers. For a list of
supported models, contact your reseller. Additional information can be found at
the manufacturer websites.
Each brand and type of headset might require different steps for connection.
Consult the documentation for your particular headset for more information. In
general, to connect a headset:
• Wireless—Connect the headset telephone cord into the telephone port on
the back of the IP Phone.
2
Figure 1.
22