Introduction - GE UTX878 Ultrasonic User Manual

Introduction

Installation
To ensure safe and reliable operation of the Model UTX878
Ultrasonic Flowmeter, the system must be installed and programmed
in accordance with the guidelines established by GE Panametrics'
engineers. Those guidelines, explained in detail in this chapter,
include the following topics:
•
Unpacking the Model UTX878 system
•
Selecting suitable sites for the electronics enclosure and the
transducers
•
Installing the transducers
•
Installing the electronics enclosure
•
Wiring the electronics enclosure
Be sure to follow all applicable local safety codes
and regulations for installing electrical equipment.
Consult company safety personnel or local safety
authorities to verify the safety of any procedure or
!ATTENTION EUROPEAN CUSTOMERS!
To meet CE Mark requirements, all cables
must be installed as described in
Appendix B, CE Mark Compliance.
!WARNING!
practice.
March 2004
1-1