Transducer Cables - GE UTX878 Ultrasonic User Manual

Transducer Cables

Installation
When installing the transducer cables, always observe established
standard practices for the installation of electrical cables. Do not route
transducer cables alongside high amperage AC power lines or any
other cables that could cause electrical interference. Also, protect the
transducer cables and connections from the weather and corrosive
atmospheres. Do not run the transducer cables along a pipe with a
surface temperature over 75°C (167°F).
IMPORTANT: Use only the cables and transducers that have been
supplied with the UTX878.
March 2004
1-3