March 2004
Entering Error Limits
(cont.)
What's Next?
2-20
12.The final prompt asks for the acceleration limit for detecting cycle
skipping. The E6: ACCELERATION error message appears if the
velocity changes by more than this limit from one reading to the
next. Press [ENT]. Use the arrow keys to change the value and
press [ENT].
You have finished entering data in the PROG menu. Do one of the
following:
•
To program in other menus, refer to Appendix A, Menu Maps, to
navigate to the desired menu.
•
To return to the display screen, press [ESC] until the display screen
reappears.
•
To configure the display, proceed to the next chapter.
Programming Site Data