Table of Contents
Advertisement
Adjusting the Numeric
Display Format
Changing the
Measurement Units
Displaying Data
When you highlight the numeric display, you can control both its
positioning and the number of decimal places displayed to the right of
the decimal point.
1. Use the [ ] or [ ] key to highlight the numeric display, and press
[ENT].
2. The Format window opens, with four options: Width (the width of
the numeric display), Decimal (the number of decimal places),
Min and Max (the respective minimum and maximum values
displayed). Use the [ ] or [ ] key to scroll to the desired option,
and press [ENT].
3. The menu now varies with your choice in Step 2.
•
If you select Width:
The program offers a choice of widths from 0 (least wide) to 8
(widest). Use the [ ] and [ ] keys to enter the desired width and
press [ENT].
•
If you select Decimal:
The program offers a choice of decimal places from 0 (no places) to
4. Use the [ ] and [ ] keys to enter the desired number of places
and press [ENT].
•
If you select Min or Max:
The program displays the programmed minimum or maximum value.
4. After making your selection, press [ESC] twice to return to the
display screen with the changed parameter.
In addition to changing the measurement parameter, you can select
(for some parameters) the particular units in which that parameter
will be displayed. (For a list of output measurement units, see Chapter
7, Specifications.)
Note: To choose between metric and English units, refer to
Chapter 4, Configuring Meter Data.
1. Use the [ ] or [ ] key to highlight the measurement units, and
press [ENT].
2. The screen displays a list of measurement units (or, for
Diagnostic, a list of diagnostic parameters). Scroll to the desired
unit, and press [ENT]. The display screen reappears with the new
measurement units.
3. Press [ESC]. The display screen returns with the changed
measurement unit.
Note: For the velocity and soundspeed parameters, it is not possible
to change the display unit.
March 2004
3-3
Advertisement
Table of Contents
