GE UTX878 Ultrasonic User Manual page 34

Ultrasonic flow transmitter
Table of Contents

Advertisement

March 2004
Entering the Pipe
Material (cont.)
2-10
6. If you have selected certain materials (such as carbon or stainless
steel, cast iron, PVC and CPVC), the UTX878 offers the option of
entering the pipe dimensions by a standardized schedule. (This
option does not appear unless you have selected one of these
materials; if you have, proceed to step a below.) Once you enter
the nominal pipe size and schedule number, the UTX878
determines the OD and wall thickness from an internal table.
a. Scroll to the Schedule option, and press [ENT].
b. A list of pipe sizes opens, from 15 to 200 mm (0.5 to 8 in.).
Scroll to the desired pipe size, and press [ENT].
c. A list of schedules opens. Scroll to the desired schedule, and
press [ENT].
You have finished entering the pipe parameters. Press [ESC] until
you return to the Pipe Material/Lining window, or continue pressing
[ESC] to return to the data display window.
Programming Site Data

Advertisement

Table of Contents
loading

Table of Contents