Operating A Memory Card - Oce WP36/50 Operation Manual

9 Repeat above steps until you have transferred all
data (files) that you want to write to the RAM disk.
Each time you finish writing data, a RAM disk write
information page is printed from the printer show-
ing the information explained in step 8 above, but
pertaining only to the data just written. To see all
data contained in the RAM disk at once, print a list
of data names as explained. See
Data Names on page 3-34
Deleting Data
It is possible to use the printer to delete data from a RAM disk
one by one. To delete data from a RAM disk, proceed as fol-
lows.
Check that the RAM disk contains data. Otherwise, the
>Delete Data will not appear on the message display.
1 Press the MENU key.
Press the or
2
Mode > appears.
RAM Disk Mode
On
3 Press the key.
Press the or
4
Data appears. The data name also appears.
>Delete Data
DataH001
5 Press the ENTER key. A blinking question mark (?)
appears before the data name.
>Delete Data
?DataH001
6 Press the or
name.
7 Press the ENTER key. Processing appears and the
data is deleted from the RAM disk. The message dis-
play returns to Ready.
Printing a List of
.
key repeatedly until RAM Disk
>
key repeatedly until >Delete
key to display the desired data
Chapter 3 Using the Operator Panel
Printing a List of Data Names
The printer prints a list of all data names (referred to as par-
titions) stored in a RAM disk for reference. (Printing a list is
also available for a font card.) To print a list of data names for
the RAM disk, proceed as follows.
1 Press the MENU key.
Press the or
2
Mode > appears.
RAM Disk Mode
On
3 Press the key.
4 Press the or
Partitions appears.
>List of
Partitions
5 Press the ENTER key. A question mark (?) appears.
>List of
Partitions ?
6 Press the ENTER key. Processing appears and the
printing of the list starts.
Figure 3-16
Printing a List of Data Names on page 3-34
See
details on device information.

2.2.11 Operating a Memory Card

The printer is equipped with a slot for a memory card. By in-
serting a memory card into the printer, the following opera-
tions become available. For details about the handling of the
memory card, see Appendix A Option Units
• Reading font data
• Reading data
• Writing data
• Deleting data
• Formatting memory card
• Printing of list of partitions
key repeatedly until RAM Disk
>
key repeatedly until >List of
PARTITION LIST
Device Information
Partition Information
.
for
3-37