Table of Contents
Advertisement
5
Press the ENTER key. A blinking cursor (_) appears
under the paper size.
>Zoom
[CS]→[CS]
6
Press the
or
change will simultaneously.
7
Press the
key to move the cursor to the target size.
8
To make a reduced print, press the
lect the target size.
>Zoom
[CS]→[CS]98%
Press the ENTER key.
9
10
Press the MENU key. The message display returns to
Ready.
Selecting the Printing Orientation
You can select the portrait or landscape page orientation. The
page orientation can be set whenever the message display in-
dicates Ready.
Portrait
Figure 3-10
1
Press the MENU key.
2
Press the
or
appears.
Page Set
3
Press the
key.
4
Press
the
>Orientation appears.
>Orientation
Portrait
key to select source size. Both sizes
or
Landscape
key repeatedly until Page Set >
>
or
key
repeatedly
5
Press the ENTER key. A blinking question mark (?)
appears.
>Orientation
?
6
Select Portrait or Landscape using the
key.
7
Press the ENTER key.
key to se-
8
Press the MENU key. The message display returns to
Ready.
Page Protect Mode
Although Auto is the default setting and this menu does not usu-
ally appear, Page Protect will be forcibly set to On if a Print
overrun Press GO error occurs due to insufficient printer
memory. Be sure to return this setting to Auto in order to main-
tain high printer memory efficiency. This can be done as follows.
1
Press the MENU key.
2
Press the
appears.
Page Set
3
Press the
4
Press the
Protect appears.
>Page Protect
5
Press the ENTER key. A blinking question mark (?)
appears.
>Page Protect
? On
6
Press the
pears.
>Page Protect
until
? Auto
7
Press the ENTER key.
8
Press the MENU key. The message display returns to
Ready.
Chapter 3 Using the Operator Panel
Portrait
or
key repeatedly until Page Set >
>
key.
or
key repeatedly until >Page
On
or
key repeatedly until Auto ap-
or
3-29
Advertisement
Table of Contents
