Oce WP36/50 Operation Manual page 44

Kyocera servicesoc operation guide wp36/50
Table of Contents

Advertisement

KPDL (AUTO) Emulation
KPDL is the Kyocera's implementation of the PostScript lan-
guage. The KPDL (AUTO) emulation enables the printer to
automatically change the emulation mode according to the
data received when printing.
In addition to KPDL (AUTO) emulation, you can use the op-
erator panel to set another emulation mode that is used very
often. The default setting is PCL 6.
1
Press the MENU key.
2
Press the
or
appears.
Emulation
PCL 6
3
Press the ENTER key. A blinking question mark (?)
appears.
Emulation
?PCL 6
4
Press the
or
appears.
Emulation
?KPDL (AUTO)
5
Press the ENTER key.
6
Press the
key. When >
played, press the
tive emulations appear.
PCL 6 (default)
KC-GL
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
7
Press the ENTER key. A blinking question mark (?)
appears.
Alt. Emulation
?PCL 6
8
Press the
or
ternative emulation appears.
9
Press the ENTER key.
key repeatedly until Emulation
key repeatedly until KPDL (AUTO)
Alt. Emulation
or
key. The names of alterna-
key repeatedly until the desired al-
10
Press the MENU key. The message display returns to
Ready.
Auto Printing of KPDL Error
The printer can be set to print error data during KPDL emula-
tion. If this is set to On, error data will be printed only when trou-
ble occurs during printing. The factory default setting is Off.
1
Press the MENU key.
2
Press the
appears.
Emulation
PCL 6
3
Press the ENTER key. A blinking question mark (?)
appears.
Emulation
?PCL 6
4
Select KPDL or KPDL (AUTO) using the
Emulation
?KPDL
5
Press the ENTER key.
Press the
6
that shown below. If >Print KPDL Errs is dis-
played when the KPDL (AUTO) emulation is select-
is dis-
ed, press the
>Print KPDL Errs
Off
7
Press the ENTER key. A blinking question mark (?)
appears.
>Print KPDL Errs
?Off
8
Select On using the
>Print KPDL Errs
?On
9
Press the ENTER key.
10
Press the MENU key. The message display returns to
Ready.
Chapter 3 Using the Operator Panel
or
key repeatedly until Emulation
key. The message display changes to
or
key to change it.
or
key.
or
key.
3-23

Advertisement

Table of Contents
loading

Table of Contents