Oce WP36/50 Operation Manual page 39

Chapter 3 Using the Operator Panel
Maximum Space Assigned to Permanent Code Jobs
This changes the hard disk space that holds permanent code
jobs. You can change the maximum space from 0 to 9999
(megabytes). The actual maximum size depends on the size
of free hard disk space, however. The default size is 1/6 of the
total hard disk space, rounded off in units of 50 MB. For ex-
ample, if the total hard disk space is 3.2 GB, the default size
is 500 MB.
1 Press the MENU key.
2 Press the or
e-MPS
3
Press the key.
4 Press the or
Configuration > appears.
>e-MPS
Configuration
5 Press the key.
6 Press the or
JOB Size.
>>Perm. Code JOB
Size 0500MB
7 Press the ENTER key, the message display shows a
blinking cursor (_).
>>Perm. Code JOB
Size 0500MB
8 Press the or
tively, the value at the blinking cursor. Use the
and keys to move the cursor right and left.
9 When the desired size is displayed, press the ENTER
key.
10 Press the MENU key and the message display re-
turns to Ready.
3-18
key and select e-MPS >.
>
key repeatedly until >e-MPS
>
key and select >>Perm. Code
key to increase or decrease, respec-
Maximum Space Assigned to Virtual Mailboxes (VMB)
This changes the hard disk space for virtual mailboxes. You
can change the maximum space from 0 to 9999 (megabytes).
The actual maximum size depends on the size of free hard
disk space, however. The default size is 1/6 of the total hard
disk space, rounded off in units of 50 MB. For example, if the
total hard disk space is 3.2 GB, the default size is 500 MB.
1 Press the MENU key.
2 Press the or
e-MPS
3 Press the key.
4 Press the or
Configuration >.
>e-MPS
Configuration
5 Press the key.
6
Press the or
>>VMB Size
0500MB
7 To change the maximum size, press the ENTER key.
The message display shows a blinking cursor (_).
>>VMB Size
0500MB
8 Press the or
tively, the value at the blinking cursor. Use the
and keys to move the cursor right and left.
9 When the desired size is displayed, press the ENTER
key.
10 Press the MENU key to exit the menu selection.
key until e-MPS > appears.
>
key and select >e-MPS
>
key and select >>VMB Size.
key to increase or decrease, respec-