Oce WP36/50 Operation Manual page 64

4 Press the or
Size appears. The paper size is also displayed.
>Cassette1 size
A4
NOTE
•Cassette3 Size > or Cassette4 Size > appears
when an option paper feeder (PF-70) is installed.
•Cassette3 Size > appears when an option paper
feeder (PF-75) is installed.
If option paper feeders are added, Cassette1 Size
and Cassette2 Size will appear for the standard pa-
per cassette and Cassette3 Size, and Cassette4
Size will appear for the option paper feeders.
5 Press the MENU key. The message display returns to
Ready.
Paper Size Unit Selection
The paper size unit (metric or inch system) used in the LCD
can be selected beforehand. At the time of Ready or when se-
lecting the size display, the unit for some paper may be re-
placed with the counterpart as shown in the following table.
metric Inch
A3 Ledger (LD)
B4 Legal (LG)
A4 Letter (LT)
A4-R (A4) Letter-R (LT)
B5 Letter-R (LT)
B5-R (B5) Statement (ST)
A5 Statement (ST)
Folio Legal (LG)
( ) abbreviated display
Table 3-10
For example, when placing the letter size paper in the cas-
sette while "mm" unit is selected. "A4" will be displayed in the
LCD. To correct the display, use the following procedures.
NOTE
You can set the option paper feeder PF-70 using the same pro-
cedures, but when using the paper feeder PF-75, you cannot
select the paper size and unit.
1 Press the MENU key.
2 Press the or
Handling appears.
Paper Handling >
key repeatedly until >Cassette
key repeatedly until Paper
Chapter 3 Using the Operator Panel
3 Press the key.
4 Press the or
size appears.
>Cassette1 size
5 Press the key. >>Unit appears.
>>Unit
mm
6 Press the ENTER key. A blinking question mark (?)
appears.
>>Unit
? mm
7
Press the or
8 Select mm or inch, and then, press the ENTER key.
9 Press the MENU key. The message display returns to
Ready.
Setting the Cassette Paper Type
Make this setting to match the paper type fed from the paper
cassette of the printer. If the paper type is set correctly, you
can perform printing using the media type selection function
from the application (printer driver). The factory default set-
ting is Plain. For more details about the paper types that can
be fed from the paper cassette, see
1 Press the MENU key.
2 Press the or
Handling > appears.
Paper Handling >
3 Press the key.
4 Press the or
Type appears. The paper type also displayed.
>Cassette 1 Type
Plain
key repeatedly until >Cassette1
key to select mm or inch.
Paper Type on page 2-5
key repeatedly until Paper
key repeatedly until >Cassette 1
.
3-43