Table of Contents
Advertisement
16
Remove the blue colored cleaning brush.
Figure 5-17
17
Pull up the lock lever on the left side of the printer,
and open the left cover 1.
Figure 5-18
18
Clean the separator by moving the cleaning brush
from left to right along with the separator.
NOTE
When removing jammed paper, be careful not to touch
the printer drum. This can cause printer malfunction.
Figure 5-19
19
Replacing of toner and cleaning of the internal parts
of the printer are completed. Close the front cover
and the left cover 1.
Allow approximately five minutes before using the
printer until the main charger unit has dried up.
Chapter 5 Maintenance
5-4
Advertisement
Table of Contents
