Paper Type - Oce WP36/50 Operation Manual

Kyocera servicesoc operation guide wp36/50
Table of Contents

Advertisement

Many envelopes have a diagonal grain orientation (See
Grain on page 2-3
). This orientation is more likely to wrinkle
and crease on its way through the printer. Before purchasing
envelopes for use with the printer, test a sample to verify the
envelope's suitability.
Do not use envelopes that have an encapsulated liquid adhe-
sive.
Avoid long printing runs consisting of envelopes only. Exten-
sive envelope printing can cause premature printer wear. To
avoid jamming due to curled envelopes, do not leave more
than approximately 10 printed envelopes stacked in the pa-
per trays during multiple envelope printing.
Colored Paper
Colored paper should satisfy the same conditions as white
1.2Paper Specifications on page 2-1
bond paper, listed in
addition, the pigments used in the paper must be able to with-
stand the heat of fusing during the printing process (up to 200
°C or 392 °F).
Preprinted Paper
Preprinted paper should have a bond paper base. The pre-
printed ink must be able to withstand the heat of fusing dur-
ing the printing process, and must not be affected by silicone
oil.
Do not use paper with any kind of surface treatment, such as
the type of paper commonly used for calendars.
Recycled Paper
Select recycled paper that meets the same specifications as
the white bond paper (see
1
) except whiteness.
NOTE
Before purchasing recycled paper, test a sample on the print-
er and check that the print quality is satisfactory.
1.2Paper Specifications on page 2-
Paper

3. Paper Type

The printer is capable of printing under the optimum setting
for the type of paper being used.
Setting the paper type for the paper source from the printer's
operator panel will cause the printer to automatically select
the paper source and print in the mode best suited to that type
of paper.
A different paper type setting can be made for each paper
source including the MP tray. Not only can preset paper types
be selected, but it is also possible for you to define and select
customized paper types. See
page 3-46
.
The following types of paper can be set.
. In
Paper
source
Media
Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
Custom 1
(to 8)*
Table 2-7
*This is a paper type defined and registered by the user. Up to eight
types of user settings may be defined. For details on
Chapter 2 Handling Paper
Customizing Paper Type on
MP
Paper
Paper
tray
Cassette
Weight
Yes
Yes
Normal 2
Yes
No
Extra
Heavy
Yes
Yes
Normal 2
Yes
No
Heavy 1
Yes
Yes
Normal 2
Yes
Yes
Normal 2
Yes
No
Light
Yes
Yes
Normal 2
Yes
Yes
Normal 2
Yes
Yes
Normal 2
Yes
Yes
Normal 2
Yes
No
Heavy 1
Yes
No
Heavy 2
Yes
No
Heavy 1
Yes
No
Normal 2
Yes
Yes
Normal 2
Yes: Can be used
Paper Type on page
Duplex path
(MP tray avail-
able only in
Cassette mode)
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
No: Cannot be used
Customizing
3-46.
2-5

Advertisement

Table of Contents
loading

Table of Contents