Table of Contents
Advertisement
•
•
•
•
•
•
•
Overview of Installation Steps
These are the five steps for installing your inverter. Do not proceed with
installation until you have read "Designing Your Installation" starting on
page 2–1.
1. Install the Remote On/Off Switch.
2. Mount the inverter.
3. Connect the chassis ground.
4. Connect AC output (if connecting to an existing AC circuit).
5. Connect the DC cables.
Installing the Remote On/Off Switch
The Remote On/Off switch can be plugged in to the remote switch jack on
the front of the inverter. The remote switch lets you turn the inverter on
and off from a convenient location—up to 10 feet (3 m) away from the
inverter.
2–10
This guide for use by qualified installers only
Copper chassis ground cable, as selected in "Selecting Cable Sizes"
on page 2–6.
AC output cable (if using the hardwire terminals)
Battery isolator (if connecting to a multiple-battery system)
Two provided DC terminal covers
Battery selector switch
2
Alternator controller
High-output alternator
1.Product number: 210-1957-01-01.
2.Optional equipment only. Use as needed by your specific installation.
1
2
2
975-0411-01-01
Advertisement
Table of Contents
