Installing The Remote Panel - Xantrex PRO XM 1000 Owner's Manual

Installing the Remote Panel

You can detach and reinstall the remote panel to monitor and operate the
XM Series Inverter up to 25 feet (7.62 m) away from the unit.
To install the remote panel in another location, you will need the following
tools and materials:
•
•
•
•
To install the remote panel in another location:
1. Turn the XM Series Inverter off.
2. Ensure AC input power is disconnected.
3. Remove the two screws securing the remote panel to the XM Series
4. Remove the remote panel and unplug the remote panel RJ11 cord from
975-0263-01-01
RJ11 jack
Figure 3-6 XM Series Inverter with Remote Panel Removed
screwdriver
jigsaw
drill (optional)
RJ11 extension cord, with male and female jacks, with a maximum
length of 25 feet (7.62 m).
Inverter and set them aside.
the jack (see Figure 3-6).
Installing the Remote Panel
XM 1000 shown
3–23