Output Mode; How To Select A New Scan Rate; Video Equalizing; What Can Be Done - Barco R9002390 Owner's Manual

Output Mode

What can be done ?

Within the output mode menu, it is possible to select a new output mode for a given input signal. The input signal can be line multiplied,
interlaced are non-interlaced.

How to select a new scan rate ?

Push the cursor keys é or ê to select 'Output Mode' (menu 1).
1
2 Press ENTER to display the output mode menu (menu 2a or 2b)
Depending on the frequency of the input source, menu 2a or 2b will be displayed.
If your input signal is PAL or SECAM signal, menu 2a will be displayed. If it is a NTSC signal, menu 2b will be displayed.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
OUTPUT MODE

VIDEO EQUALIZING

NOISE REDUCTION
CONTRAST ENHANCEMENT
ADVANCED SETTINGS
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Push the cursor keys é or ê to select a new scan rate (menu 3).
3
4 Press ENTER to activate this scan rate.
e.g. 100 Hz 625 lines P ==>
Vertical frequency of the image : 50 Hz
Quantity of horizontal lines : 625 lines
Interlace mode : NI = Non-interlaced image (progressive scan).
LINEMULTIPLIER
OUTPUT MODE
50Hz 625 Lines NI
100hz 625 Lines NI
50Hz 1250 Lines NI
100Hz 1250 Lines I
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 3
Video Equalizing
What can be done ?
The shapness of the image can be adjusted for 3 frequency bands (low, medium and high) separately.
To make it a little bit easy, 7 pre-programmed factory presets are available. The customer is also free to adjust its own sharpness
for 3 bands.
How to select Video Equalizing ?
Push the cursor keys é or ê to select 'Video Equalizing' (menu 1).
1
2 Press ENTER to display the adjustment menu (menu 2).
5976064 BARCOCINE 8 09022000
LINEMULTIPLIER
OUTPUT MODE
50Hz 625 Lines NI
100hz 625 Lines NI
50Hz 1250 Lines NI
100Hz 1250 Lines I
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2a
Random Access Adjustment Mode
LINEMULTIPLIER
OUTPUT MODE
60Hz 525 Lines NI
120hz 525 Lines NI
60Hz 1050 Lines NI
120Hz 1050 Lines I
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2b
7-9