Start Up Of The Adjustment Mode; Adjustment Mode; Start Up; Possible Paths - Barco R9002390 Owner's Manual

4

START UP OF THE ADJUSTMENT MODE

Adjustment Mode

Start Up

All picture adjustments are made while in the 'Adjustment mode'.
Press the ADJUST key.
The projector displays the 'Main menu' (menu 1).
MAIN MENU
Image Control
IRIS Control
Sound Control
Function keys
Service Menus
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
You are now in the 'Adjustment mode' . The cursor keys are used to make menu selections and also vertical and horizontal adjustments.
The ENTER and EXIT keys are used to move forward and backward through the menu structure. The ADJUST key can be used
to terminate the adjustment mode while a path selection menu (head menu) is displayed.

Possible Paths

Depending on the projector configuration the following paths are possible with the 'Main menu'.
Image Control - Allows to change the color temperature of the image and to select another format (adjustment) for the image.
IRIS-Control - This selection will only be available when the autoconvergence unit IRIS is built in into the projector. This control
will allow to align the projector automatically.
Sound Control - Allows to select the sound mode (only when a sound unit is built in).
Function Keys - Gives an overview of the programmed function for each key.
Service Menus - Installation and adjustment menus to set up the projector. Before entering a warning will be displayed.
5976064 BARCOCINE 8 25012000
Start up Adjustment mode
4-1