Start Up; Important; Horizontal Phase Adjustment; Note - Barco R9002390 Owner's Manual

How to activate ?
1. Push the cursor key é or ê to select 'Factory Preset' (menu 1).
2. Press ENTER to activate.
LINE MULTIPLIER
TIME BASE CORRECTION : ON
LUMINANCE DELAY
V SYNC REF : INDIRECT
CLAMP GATING : OFF
FACTORY PRESET
WARNING : ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Geometry Adjustments
What can be done ?
The geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other
color images. The following adjustments can be adjusted Left-right (EW) and Top-Bottom Corrections, Blanking, Horizontal Amplitude,
Vertical Amplitude, Vertical Linearity and Horizontal Phase.

Start Up

To start up the geometry corrections, handle as follow :
1. Push the cursor key é or ê to highlight 'Geometry' (menu 1).
2. Press ENTER to select.
The Geometry menu will be displayed on the screen (menu 2).
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Important

The convergence corrections are disabled during geometry corrections. The blanking corrections are only enabled during the
blanking adjustments.

Horizontal Phase Adjustment

Start Up
1. Push the cursor key é or ê to highlight 'H Phase' (menu 1).
2. Press ENTER to activate.
The external image with a text box in the middle will be projected.

Note

No horizontal phase adjustment is available on the internal # pattern.
5976064 BARCOCINE 8 09022000
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
Random Access Adjustment Mode
7-13