Convergence Adjustment; What Has To Be Done; Note; Adjustment Order - Barco R9002390 Owner's Manual

BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with
then <ENTER>
<EXIT> to return.

Convergence Adjustment

What has to be done ?

Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments are performed on
the red image while superimposed on the green image and then on the blue image while superimposed on the green image. The
screen is devided into 25 areas (image 1)

Note

The green convergence adjustments can be added as an option. When these are available, start always with 'green only'. This option
will also be indicated on the convergence menu.

Adjustment order

Adjust first the 'green only' when available and continue with red on green and blue on green.

Start up

1. Push the cursor key é or ê to select desired adjustment.
2. Press ENTER to activate.
5976064 BARCOCINE 8 09022000
Adjustment of the blanking on the of the image
Adjustment of the blanking on the bottom of the image
Correct by pushing the cursor keys up or
down
or
Adjustment of the blanking on the left side
Adjustment of the blanking on the right side
Correct by pushing the cursor keys to the
right or to the left
Random Access Adjustment Mode
7-23