When The Source Is Selected; Picture Controls - Barco R9002390 Owner's Manual

When the source is selected

When a valid and available source is selected, there will be information displayed on the screen about that source. This information
includes :
- Source number
- Horizontal frequency
- Vertical frequency
Source 2
Fh= 15.6 kHz
Fv= 50 Hz
When the entry is a non valid source number, a warning appears on the screen : ' input not available '.
WARNING
input not
available
When a valid source number is selected, the projector will display this source or it will wait on the selected source number until the
source becomes available. A message 'source not available' will be displayed for a short time.
WARNING
source not
available

Picture controls

The picture controls can be adjusted with :
With the RCU
The control keys are located on the right side of the key panel of the RCU and indicated with the name of the control and an icon.
When an image control is pressed, a text box with bar scale and the function name of the control, e.g. 'brightness...' appears on the
screen (only if text is ON). The length of the bar scale indicates the current memorized setting for this source. The bar scale changes
as the + or - side of the button of the control are pressed.
Brightness Control
A correct 'brightness' setting is important for good image reproduction. Adjust the brightness with the + button and - button until the
darkest parts of the picture appear black.
A bar scale gives a visual indication on the screen of the current brightness setting while pressing on the above indicated buttons.
If the bar scale is not visible on the screen, press 'TEXT' once and retry the above indicated buttons.
The bar scale increases when pressing on the + button (higher brightness) and decreases when pressing on the - button (lower
brightness).
Contrast Control
A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting conditions.
A bar scale gives a visual indication on the screen of the current contrast setting while pressing the + or - buttons . If the bar scale
is not visible on the screen, press 'TEXT' key once and retry the above indicated buttons.
The bar scale increases when pressing on the + button (higher contrast) and decreases when pressing on the - button (lower contrast).
Color Saturation Control
Color saturation is only active for Video and S-Video. Adjust the color saturation using the + and - buttons . A bar scale gives a visual
indication on the screen of the current color setting while pressing on the above indicated buttons. If the bar scale is not visible on
the screen, press 'TEXT' key once and retry the above indicated buttons. The bar scale increases when pressing on the + button (richer
colors) and decreases when pressing the - button (lighter colors).
Tint Control
Tint is only active for Video and S-Video. Tint control is effective only when using the NTSC 4.43 or NTSC 3.58 system. A bar scale
gives a visual indication on the screen of the current tint setting while pressing the + or - buttons . If the bar scale is not visible on the
screen, press the 'TEXT' key once and retry the above indicated buttons.
The bar scale increases when pressing on the + button and decreases when pressing the - button.
Sharpness Control.
Sharpness control only active for Video and S-Video. A bar scale gives a visual indication on the screen of the current sharpness setting
while pressing the + or - buttons. If the bar scale is not visible on the screen, press 'TEXT' key once and retry the above indicated
buttons.
The bar scale increases when pressing on the + button (sharper picture) and decreases when pressing on the - button (softer picture).
5976064 BARCOCINE 8 25012000
Getting Started
3-7