Configuration Page; Video Configuration - Extron electronics SMD 101 User Manual

Configuration Page

The
features of the SMD 101. The controls are in four groups;
Display
(see figure 24).

Video Configuration

Select
pattern selection for troubleshooting or setup of connected displays, selecting the HDMI
output mode, and configuration of the stream buffering.
Figure 24.
General Video Settings Panel
This panel allows selection of a test pattern. The confidence display shows a thumbnail of
the playing pattern (see figure 24).
Click the drop-down list under the test pattern confidence display and select a pattern from
the following:
•
•
•
•
Click the drop-down list again and select
NOTE: When a test pattern is selected, source streaming stops and the test pattern
tab provides controls on the global navigation bar to adjust basic
Configuration
, and accessed from a ribbon toolbar across the top of the screen
Automation
to open the Video Configuration page (see figure 24). The page allows test
Video
Configuration - Video Configuration Page
Alternating Pixels
Alternating lines
Crosshatch
Crosshatch 4x4
is switched to the output. If the output format is changed, the test pattern is also
stopped while the output reformats. You must then restart the test pattern from the
player controls (press
Play
Video
• Color bars
Grayscale
•
• Ramp
White field
•
to stop playing the test pattern.
Off
) or select another test pattern.
SMD 101 • Web-based User Interface
, ,
Audio On Screen
28