Copying Config Files Using Internet Explorer - Extron electronics SMD 101 User Manual

Copying Config Files Using Internet Explorer

Internet Explorer does not automatically save the SMD 101 config files to the host computer
(see
and ip.cfg files must be saved using a text file copy.
To save a configuration file using IE:
1.
2.
3.
4.
5.
6.
7.
8.
9.
To save the IP configuration file:
1.
2.
3.
4.
The two files (box.cfg and ip.cfg) are now ready for use.
To return to the SMD 101 web interface, click
Configuration panel on page 37), but attempts to open them instead. The box.cfg
Open the web-interface for the SMD 101 (see
Interface
on page 14).
Open the Advanced Configuration page (see
page 34).
Save the box configuration file (see
When the configuration file is saved, a new browser tab automatically opens and
displays the contents of the configuration text file.
Press <CTL+A> (or triple-click anywhere in the text line) to select the entire contents of
the file, then <CTL+C> to copy the full text to the clipboard.
Open a text program (such as Notepad) and paste the text line using <CTL+V> or
from the toolbar.
Edit > Paste
Choose a location for the file, then select
In the dialog, rename the file box.cfg.
Save As
Click .
Save
Repeat steps 1 to 3 choosing the
Continue with steps 4 to 7.
Rename the file IP.cfg in step 8.
Click .
Save
Accessing the Web-based User
Advanced Configuration Page
Firmware Loader on page 36).
from the toolbar.
File >SaveAs
User > Downloads
box.cfg
option in step 3.
IP Config
in the IE browser.
Back
SMD 101 • Reference Information
on
92