5.
Select
singlemode
Figure 49.
6.
Continue using the program as described in the
Software, steps 1 through 3, starting on page 73).
Using the Help System
For information about program features, you can access the help program in any of the
following ways:
From the Extron Electronics program folder or group, double‑click the
•
MATRIX Switcher Help icon (shown at right).
•
From within the Matrix Switcher Control Program, click
the menu bar.
•
From within the Matrix Switcher Control Program, press the <F1> key.
as the Matrix Model,
Fiber Matrix
or
for each board installed (see figure 49). Click
multimode
Emulate Mode Configuration
FOX Matrix 3200 and 7200 Switchers • Matrix Software
or
as the Default Size, and either
3200
7200
Using the Matrix Switcher Control
>
Help
Contents
.
OK
on
90