Installation
This section details the installation and configuration of the FOX Matrix Switchers, including:
•
•
•
Setup and Installation Checklist
Get Ready
Configure the Matrix Switcher
Perform Physical Installation
Ancillary Operations
Setup and Installation Checklist
Rear Panel Boards, Cabling, and Features
Front Panel Configuration Port
Familiarize yourself with the FOX matrix switcher.
Obtain IP setting information for the matrix switcher from the local network
administrator. Read the
Ethernet Connection
Install the desired I/O boards
If desired, install the switcher in a rack (see
If desired, create
(Page
92) and replace
Cable input and output devices to the I/O boards
If desired, connect computers or control systems to any of the remote control ports on
the switcher (two serial ports
Connect power
(page
16).
Test the switcher by creating a tie
Install the Matrix Switchers Control Program
section, beginning on page 117.
(page
110).
Mounting the Switcher
(Page
115) button labels.
(page
[page 13
and
17] and a LAN port
page
(page
27).
(page
72).
FOX Matrix 3200 and 7200 Switchers • Installation
on page 109).
11).
[page
13]).
7