SNMP General Settings fields
To edit the SNMP General Settings fields, ensure that the
selected (SNMP is disabled by default). Click the
button to abandon changes.
Cancel
SNMP Community Name fields — The two names are similar to passwords, granting
public, read‑only [
SNMP (rd)
default names are
and
public
Contact Name and Location fields — The two fields add optional information as to the
location of the NMS. By default,
SNMP Port field — This field identifies the port that the NMS uses to communicate with
the switcher and should only be changed by IT personnel. The default port is
SNMP Manager (Trap Target) fields
To edit each row of the SNMP Manager (Trap Target) settings, click the
the fields available for editing. The button changes to
settings, click the
button.
Save
The three
fields identify up to three NMS targets to receive trap notifications of
IP Address
the switcher failure and repair status or a mix of trap types to the same target.
The check boxes and drop boxes associated with each IP address field permit the operator
to specify specific criteria under which the switcher sends trap notifications.
•
In the associated
Missing Input
absence of a signal.
Check the
and
•
Fans
Power
•
In the associated
Notification Options
of failures, fixes, both, not notified, or to remove the target from trap list (select
). The
SNMP Target
Suspend
the notification list when they are unavailable.
Submit
] and private, read‑write access [
.
private
is assigned to the
Not Specified
Save
drop boxes, select the inputs to trap the presence or
boxes to trap the fans and power supplies.
drop box, select whether to notify the target
option is useful for temporarily removing NMS stations from
FOX Matrix 3200 and 7200 Switchers • HTML Operation
check box is
SNMP Enabled
button to save all changes or the
] to the NMS. The
SNMP (wrt)
and
Name
Location
.
161
button to make
Edit
. After editing the associated
Delete
fields.
104