Table of Contents
Advertisement
4.
Reset Operations
The rear panel has a Reset button that initiates four levels of resets (numbered 1, 3, 4, and 5
for the sake of comparison with an Extron IPL product). The Reset button is recessed, so
use a small screwdriver, a pointed stylus, or a ballpoint pen.
For different reset levels, press and hold the button while the switcher is running or press
and hold the button while you apply power to the switcher.
See the
ATTENTION:
NOTE: The reset modes listed on the next page close all open IP and Telnet
Exit the Serial Port Selection and Configuration mode: Press and release an
output button.
All Control buttons and the Output 31 (71) and Output 32 (72)
Press and release
buttons return to unlit or background illumination.
an output button.
5
ENTER
table
on the next page for a summary of the modes.
Review the reset modes carefully. Using the wrong reset mode may
result in unintended loss of flash memory programming, port reassignment, or a
controller reboot.
connections and close all sockets. Also, the following modes are separate functions,
not a continuation from Mode 1 to Mode 5.
C O N T R O L
0
31 32
VIEW
ESC
PRESET
FOX Matrix 3200 and 7200 Switchers • Operation
43
Advertisement
Table of Contents
Need help?
Do you have a question about the FOX Matrix 3200 and is the answer not in the manual?
Questions and answers