Software; Pre-Installation Checklist - Avaya one-X 9600 Series Installation And Maintenance Manual

9600 Series SIP IP Telephone Installation
Series SIP IP Telephones, see the instructions boxed with the telephone. Wall or desk mount
instructions are also available on the Avaya support Web site http://www.avaya.com/support.

Software

The 9600 Series IP Telephones ship from the factory set to the H.323 protocol. To run the
telephones in a SIP environment, you must convert the telephone(s) to SIP settings. Further, a
factory-shipped 9600 Series IP Telephone will not contain the most up-to-date software for
registration and SIP operation. When the telephone is first plugged in, a software download
from an HTTP server might be initiated. The software download gives the telephone upgraded
H.323 functionality, however, you must still download the latest SIP software bundle for
telephones to be converted to SIP, then convert applicable telephones to run SIP software, as
described in Converting Software on 9600 Series IP Telephones
For subsequent downloads of software upgrades, SIP Enablement Services (SES) provides the
capability for a remote reboot of the IP telephone. As a consequence of restarting, the
telephone automatically downloads new software if it is available.
Series SIP IP Telephones

Pre-Installation Checklist

Before plugging in the 9600 Series IP Telephones, verify that all the following requirements are
met. Failure to do so prevents the telephones from working properly and can have a negative
impact on the network. Print copies of this checklist for each server and IP telephone.
Verify These Network Requirements
1. Ensure that the LAN uses Ethernet Category 5e cabling running the IPv4 version of
Internet Protocol.
14 9600 Series SIP IP Telephones Release 2.4 Installation and Maintenance Guide
covers downloading new software releases.
on page 16.
Chapter 4: Maintaining 9600