Avaya one-X 9600 Series Installation And Maintenance Manual page 47

3. The telephone displays the Global Settings screen and prompts you to use the Right and
Left navigation arrows or a text entry to change a setting and displays the following settings
and their active values:
Setting
SIP Mode:
SIP Domain:
Avaya Environment:
Transport Type:
Reg Policy:
Failback Policy:
Avaya Config
Server:
User ID Field:
Host to ping
4. If you selected SIP Proxy Server, the telephone displays the message "Select SIP proxy to
configure."
5. Select the proxy server for which you want to update the Transport Type and/or the SIP Port
and press Select or OK. The telephone displays the IP Address or DNS Name of the server
you selected and its current Transport Type and SIP Port values.
6. To change a setting:
- Use the Down or Up Arrow indicator to move to the line you want to change.
Description/Example
Proxied or Peer-to-Peer.
e.g., avaya.com
Yes or No - indicates whether
only an Avaya environment (CM
& SES) is in effect.
TCP or TLS or UDP.
alternate or simultaneous
admin or auto
IP Address of Avaya
configuration server - only if
PPM is not on the same server
as the SIP Proxy server.
Activates "1" /deactivates "0"
User ID field on Login screen.
IP Address or DNS Name of
server to ping. This is not a
setting but a determiner of
whether a specific server is
reachable. Press the Ping
softkey to initiate the check. The
telephone sends four pings and
displays the results in a text
block screen. If the ping fails,
the message "Unable to contact
host" displays.
Configuring SIP Settings
Changes this
Configuration Parameter
SIP_MODE
SIP_DOMAIN
DISCOVER_AVAYA_
ENVIRONMENT
SIPSIGNAL
SIPREGPROXYPOLICY
FAILBACK_POLICY
CONFIGURATION_SERVER
or
CONFIGURATION_SERVER
_IN_USE
ENABLE_SIP_USER_ID
N/A
Issue 3 December 2008 47