Avaya one-X 9600 Series Installation And Maintenance Manual page 15

Verify These Network Requirements (continued)
2. Ensure that the following is installed and/or set up and operative:
Avaya Communication Manager (CM) Release 4.0 or greater.
SIP Enablement Services Release 4.0 or greater. 9600 Series SIP IP
Telephones with SIP Release 2.0 or greater software running on SES 4.0
servers have only those features compatible with that server.
NTP Time Server.
!
Important:
Note:
Note:
3. The following circuit packs are installed on the switch:
TN2602 IP Media Processor circuit pack. Sites with a TN2302 IP Media
Processor circuit pack are strongly encouraged to install a TN2602 circuit pack
to benefit from increased capacity.
TN799B, C, or D Control-LAN (C-LAN) circuit pack.
!
Important:
4. The Communication Manager (CM) call server is configured correctly, as described in
the Avaya one-X™ Deskphone Edition for 9600 Series SIP IP Telephones
Administrator Guide and Avaya Communication Manager documentation. Both
documents are available at http://www.avaya.com/support.
5. The DHCP server and application are administered as described in the Avaya
one-X™ Deskphone Edition for 9600 Series SIP IP Telephones Administrator Guide.
6. The HTTP server and application are administered as described in the Avaya
one-X™ Deskphone Edition for 9600 Series SIP IP Telephones Administrator Guide.
7. The SIP upgrade script and application files from the Avaya Support Web site,
http://www.avaya.com/support, are loaded correctly on the HTTP/HTTPS server.
8. If applicable, the Voice Mail server is administered as described in the Avaya one-X™
Deskphone Edition for 9600 Series SIP IP Telephones Administrator Guide.
Notes:
- Any or all of the server applications mentioned in items 5-8 can be co-resident on the
same hardware, subject to the specific restrictions of each individual application.
- See the Avaya one-X™ Deskphone Edition for 9600 Series SIP IP Telephones
Administrator Guide for more information about:
Important:
The above must be configured properly to support SIP. The CM
Outboard Proxy SIP (OPS) Station Form must be completed to
enable SIP prior to plugging in the telephones. For information, see
SIP Support in Avaya Communication Manager Running on Avaya
S8XXX Servers (Document Number 555-245-206).
CM/SES 4.0, 5.0, and 5.1is the only environment that supports
survivability with the supported third-party proxy/gateway from
Audiocodes.
Important:
IP telephone firmware requires TN799C V3 or greater C-LAN circuit
pack(s). For more information, see the Communication Manager
Software and Firmware Compatibility Matrix on the Avaya support
Web site http://www.avaya.com/support.
Pre-Installation Checklist
Issue 3 December 2008 15