Avaya one-X 9600 Series Installation And Maintenance Manual page 71

16. While the telephone is attempting to contact the SCEP server and to obtain a certificate, the
Title Line displays:
SCEP: In progress...
s secs
17. where s is the number of seconds since SCEP was initiated. If the request for a certificate is
granted, SCEP: Successful displays on the Title line for at least one second, and remains
until it is replaced by a subsequent display.
18. If a device certificate and private key are successfully downloaded, they are saved in
non-volatile memory along with the MYCERTURL value used to obtain them.
19. Upon successful initialization and power-up, SIP IP telephones display the Login screen
with the following prompt:
Enter Username and Password
20. Enter the User Name/ID assigned to this telephone.
21. Enter the password and press Login.
The extension is visible during entry but the password displays as asterisks. The system
determines whether the extension is in use.
22. The telephone contacts PPM, logs in, and downloads the configuration file while displaying:
Downloading configuration
23. SIP Software Release 2.0 and up supports visiting user capabilities. When the value of the
VU_MODE configuration parameter is "1" (Optional), the Primary Phone field on the Login
screen requires indication of whether this is the user's primary telephone. Selecting "yes"
causes the telephone to operate as a non-VU phone and the inactivity timer is not applied.
Selecting "no" causes the telephone to operate in the Visiting User mode, where an
inactivity timer will log the user off after a predetermined time. For more information about
this feature, see the Avaya one-X™ Deskphone Edition for 9600 Series SIP IP Telephones
Administrator Guide.
24. Successful completion of this process produces a dial tone when the Speaker button is
pressed or the handset is lifted.
25. Continue with the next procedure.
Scenarios for the Restart Process
Issue 3 December 2008 71