Disable/Enable Debug Mode - Avaya one-X 9600 Series Installation And Maintenance Manual

Local Administrative Options
Use the following procedure to clear the telephone of its administrative, user-assigned, and
options values.
1. When you select CLEAR from the Admin Procedures Screen, the telephone displays a
confirmation screen.
2. If you do not want to clear all values, press No to terminate the procedure and retain the
current values. Press Yes to clear all values to their initial default values.
The telephone displays the following text:
Clearing values.
The telephone is cleared to its "out of the box" state, resetting the following values to their
factory defaults:
The 802.1X identity and password.
All system values and system initialization values.
User options, parameter settings, identifiers and password.
Any user data like Contact Lists or Call Logs are deleted.
After clearing the values, the telephone resets.

Disable/Enable Debug Mode

Use the following procedure to turn the debug mode for the button module serial port on or off.
9600 Series IP Telephones running SIP Release 2.0 software do not support a button module.
!
CAUTION:
A DEBUG setting of "On" disables any adapter plugged into the MOD jack on the
CAUTION:
underside of the telephone.
1. When you select DEBUG from the Admin Procedures Screen, the following text displays:
Debug Mode
where the setting shown is the text string associated with the current system value of
DEBUG, defined as:
"On" if the DEBUG_ENABLED system value is "1".
"Off" if the DEBUG_ENABLED system value is "0".
2. Use the navigation arrows or press Change to toggle the selected setting from On to Off or
vice versa.
40 9600 Series SIP IP Telephones Release 2.4 Installation and Maintenance Guide
On