Avaya one-X 9600 Series Installation And Maintenance Manual page 37

Use the following procedure to invoke manual address information programming.
1. When you select ADDR from the Admin Procedure Screen, the Static Addressing Local
Procedure screen displays as follows with the prompt "Select address to change.":
Static Addressing screen
Use DHCP
Phone
Router
Mask
HTTPS File Server
HTTP File Server
DNS Server
802.1Q
VLAN ID
VLANTEST
Host to ping
where:
nnn.nnn.nnn.nnn is the current IP Address associated with the specific address
information to its left, which could be either a value previously set by a technician, or the
original IP Address value if no previous change was made,
dddd is the current value of L2QVLAN and ddd is the current value of VLANTEST,
respectively.
AVohhhhhh where o has one of the following values based on the OID (first three
octets) of the telephone's MAC address:
- "A" if the OID is 00-04-0D,
- "B" if the OID is 00-1B-4F,
- "E" if the OID is 00-09-6E,
- "L" if the OID is 00-60-1D,
- "T" if the OID is 00-07-3B, and
- "X" if the OID is anything else, and
where hhhhhh are ASCII characters for the hexadecimal representation of the last three
octets of the telephone's MAC address
2. Use the navigation arrows to scroll to and highlight the address/item you want to change,
then use the appropriate softkey(s) and the dialpad to change the value as described in
Step 3.
Yes
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
0=auto, 1=on, 2=off
dddd
ddd
nnn.nnn.nnn.nnn or
AVohhhhhh
Static Addressing Installation
Line Description and
(Configuration Parameter Value)
Yes or No (USE_DHCP)
Telephone IP Address (IPADD)
Router in use; gateway/router IP
Address(es) (ROUTER)
IP network mask (NETMASK)
IP Address of HTTPS File Server
(TLSSRVR)
IP Address of the HTTP File Server
(HTTPSSRVR)
DNS server IP Address(es)
(DNSSRVR)
(L2Q)
(L2QVLAN)
Number of seconds to wait for a
DHCP offer (VLANTEST)
IP Address or DNS Name
Issue 3 December 2008 37