Configuring Time Server Settings - Avaya one-X 9600 Series Installation And Maintenance Manual

Local Administrative Options
- If the field shows Right/Left Arrow indicators, press the Change softkey or the Right or
Left navigation arrow to cycle through the settings. Depending on the current value, the
next sequential value displays.
- If the field does not show the Choice indicator, press the appropriate softkey(s) and/or
use the dialpad to enter the new value.
7. Press Save to store the new setting(s) and redisplay the Admin Procedures screen.

Configuring Time Server Settings

Use this procedure to designate a server for Simple Network Time Protocol (SNTP) and to set
corresponding values.
1. When you select SNTP... from the Admin Procedures Screen, the telephone displays the
following settings and prompts you to enter the IP Address of the SNTP server:
SNTP Server:
SNTP GMT Offset:
SNTP Daylight
Savings Time:
2. To change a setting:
- Use the Down or Up Arrow indicator to move to the line you want to change.
- If the field shows Right/Left Arrow indicators, press the Right or Left navigation arrow to
cycle through the available settings.
- If the field does not show Arrow indicators, press the appropriate softkey(s) and/or use
the dialpad to enter the new value.
3. Press Save to store the new setting and redisplay the Admin Procedures screen.
48 9600 Series SIP IP Telephones Release 2.4 Installation and Maintenance Guide
Description/Example
IP address or DNS Name of the
network time server.
Local time difference in hours from
Greenwich Mean Time, e.g., NJ is
-5.
Indicates whether the telephone
should recognize Daylight Savings
Time (DST)(0=no DST, 1=DST
activated as per DSTOFFSET,
2=automatic based on DSTSTART
and DSTSTOP values.
Changes this
Parameter
SNTPSRVR or
SNTPSRVR_IN_USE
GMTOFFSET
DAYLIGHT_SAVING_
SETTING_MODE