Attaching The Desk Stand; Mounting The Phone To The Wall; Mb100 Wall Mount Kit - Cisco SPA 514G User Manual

Number Feature
1 Auxiliary port - only for use with the Cisco SPA attendant console
2 Power port - insert the power adapter plug here
3 Additional Ethernet port - connect an Ethernet cable to this port to provide network connectivity
to a PC.
4 Switch (Ethernet) port - connect the network cable to this port
5 Phone cord port - Insert one end of the phone cord here and the other into the jack at the bottom
of the handset

Attaching the desk stand

Note: If you want to mount the phone to a wall, you don't need to attach the desk stand. If you're also
attaching a Cisco SPA attendant console, you should attach the console before attaching the desk
stand.
1. Match the tabs on the desk stand with the slots on the back of the phone.
2. Slide the bottom tabs into the slots.
3. Lightly press down on the top of the desk stand - it should easily slide into the top slots (don't
force it).

Mounting the phone to the wall

To mount your IP phone to a wall, you'll need the MB100 wall mount bracket kit (you'll need to buy this
separately).

MB100 wall mount kit

1. Align the bracket with the holes in the phone's base.
Version 2.1 13 of 33